25-02-2013, 00:17
Ciao a tutti una curiosita' su questo ampli.......e' possibile che c'e tutta questa differenza di watt rms a soli pochi volt di ingresso??.......
questa e' la scheda tecnica dell ampli mtx 152
Thunder 152 Amplifier
Thunder 152 Amplifier RMS Power measured at 12.5 Volts DC:
37.5 Watts x 2 into a 4 Ohm load with less than 0.05% Thd+N
75 Watts x 2 into a 2 Ohm load with less than 0.1% Thd+N
150 Watts bridged into a 4 Ohm load with less than 0.1% Thd+N
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC
90 Watts x 2 into a 4 Ohm load
165 Watts x 2 into a 2 Ohm load
325 Watts bridged into a 4 Ohm load
Signal to Noise Ratio:
110dB A-Weighted
questa e' la scheda tecnica dell ampli mtx 152
Thunder 152 Amplifier
Thunder 152 Amplifier RMS Power measured at 12.5 Volts DC:
37.5 Watts x 2 into a 4 Ohm load with less than 0.05% Thd+N
75 Watts x 2 into a 2 Ohm load with less than 0.1% Thd+N
150 Watts bridged into a 4 Ohm load with less than 0.1% Thd+N
Dynamic Power (IHF-202 Standard) measured at 14.4 Volts DC
90 Watts x 2 into a 4 Ohm load
165 Watts x 2 into a 2 Ohm load
325 Watts bridged into a 4 Ohm load
Signal to Noise Ratio:
110dB A-Weighted
