17-05-2013, 22:42
Salve , chiedo a chi ha provato questi due ampli :
LANZAR HTG257 -
2 x 500W RMS @ 4 OHMS
2 x 1000W Max @ 4 OHMS
1 x 2000W Max @ 4 OHMS Bridged
2 x 650W RMS @ 2 OHMS
Electronic Crossover Network
Bass Boost Circuit
Bridgeable at 4 Ohms
2 Ohm Stereo Stable
Nickel RCA Inputs
Line Outs for Left and Right Channel
Low Pass Filter Controls
High Pass Filter Controls
Power and Protection LED Indicators
Soft Turn-on/Turn-off
THD: <0.01%.
S/N Ratio: >90dB
Channel Separation: >65dB
Freq. Response: 10Hz~45KHz
HPF Freq. Response: 80KHz
LPF Freq. Response: 50Hz-250Hz
Subwoofer Level Control
Fuse: 40A x 1
Dimensions: 12.99''(L) x 2.24''(H) x 8.81''(W)
LANZAR VIBE 242 -
2 x 500 Watts RMS @ 4 Ohms
2 x 1000 Watts Max @ 4 Ohms
1 x 2000 Watts Max @ 4 Ohms Bridged
2 x 840 Watts @ 2 Ohms RMS
MOSFET Automatically Switches to Maintain Rated
Power Over a Wide Range of Battery Voltages
Stiffly Regulated PWM-Type Power Supplies
Variable Input Level Controls for Each Pair of Cannels
Variable High Low Pass Crossover Controls
High-Efficiency, Heavy Aluminum Heatsink
Remote Subwoofer Bass Control
Electronic Crossover Network
Bass Boost Circuit
Bridgeable at 4 Ohms
2 Ohm Stereo Stable
Silver RCA Inputs
Line Outs for Left Right Channels
Power Protection LED Indicators
Advanced Protection Circuitry
Soft Turn On/Off
Frequency Response: 10 Hz-40 kHz
S/N Ratio: ?95 dB
Fuse: 20A x 2 (da un venditore ebay c'è scritto però 30A x 2)
Dimensions: 10.25''W x 2.36''H x 15.16''L
ORA , MI RENDO CONTO CHE NON EROGANO TUTTI QUESTI WATT , MA QUALCUNO LI HA PROVATI? COME VANNO?DEVO AMPLIFICARCI UN RE SX PROVVISORIAMENTE O IN STEREO A 2 OHM O IN MONO
-GRAZIE
LANZAR HTG257 -
2 x 500W RMS @ 4 OHMS
2 x 1000W Max @ 4 OHMS
1 x 2000W Max @ 4 OHMS Bridged
2 x 650W RMS @ 2 OHMS
Electronic Crossover Network
Bass Boost Circuit
Bridgeable at 4 Ohms
2 Ohm Stereo Stable
Nickel RCA Inputs
Line Outs for Left and Right Channel
Low Pass Filter Controls
High Pass Filter Controls
Power and Protection LED Indicators
Soft Turn-on/Turn-off
THD: <0.01%.
S/N Ratio: >90dB
Channel Separation: >65dB
Freq. Response: 10Hz~45KHz
HPF Freq. Response: 80KHz
LPF Freq. Response: 50Hz-250Hz
Subwoofer Level Control
Fuse: 40A x 1
Dimensions: 12.99''(L) x 2.24''(H) x 8.81''(W)
LANZAR VIBE 242 -
2 x 500 Watts RMS @ 4 Ohms
2 x 1000 Watts Max @ 4 Ohms
1 x 2000 Watts Max @ 4 Ohms Bridged
2 x 840 Watts @ 2 Ohms RMS
MOSFET Automatically Switches to Maintain Rated
Power Over a Wide Range of Battery Voltages
Stiffly Regulated PWM-Type Power Supplies
Variable Input Level Controls for Each Pair of Cannels
Variable High Low Pass Crossover Controls
High-Efficiency, Heavy Aluminum Heatsink
Remote Subwoofer Bass Control
Electronic Crossover Network
Bass Boost Circuit
Bridgeable at 4 Ohms
2 Ohm Stereo Stable
Silver RCA Inputs
Line Outs for Left Right Channels
Power Protection LED Indicators
Advanced Protection Circuitry
Soft Turn On/Off
Frequency Response: 10 Hz-40 kHz
S/N Ratio: ?95 dB
Fuse: 20A x 2 (da un venditore ebay c'è scritto però 30A x 2)
Dimensions: 10.25''W x 2.36''H x 15.16''L
ORA , MI RENDO CONTO CHE NON EROGANO TUTTI QUESTI WATT , MA QUALCUNO LI HA PROVATI? COME VANNO?DEVO AMPLIFICARCI UN RE SX PROVVISORIAMENTE O IN STEREO A 2 OHM O IN MONO
-GRAZIE